事實上，空調通風管道的加工安裝是一個非常重要的環節。通風管道的加工和安裝有一些具體的要求和規范，是所有個人或企業都應該學習和學習的。那么，通風管道的加工規范有哪些呢？接下來就和小編一起來看看吧。
In fact, the processing and installation of environmental protection air conditioning ventilation duct is a very important link. There are some specific requirements and specifications for the processing and installation of ventilation ducts, which should be learned by all individuals or enterprises. So, what are the processing specifications for ventilation ducts? Next, let's take a look with Xiaobian.
濟南通風管道加工規范：
Jinan ventilation pipe processing specification:
規格。這里所說的規格是通風管道的基本規格，以及我們需要的通風管道的尺寸和尺寸。值得注意的是，我們在確定規格時需要與空調的使用相關聯。只有這樣，才能保證在風管規格設定好后，才能與空調連接，發揮其功能，完成其使用效果。
Specifications. The specifications mentioned here are the basic specifications of the ventilation duct, as well as the size and size of the ventilation duct we need. It is worth noting that the specification needs to be related to the use of air conditioners. Only in this way can it be ensured that after the air duct specification is set, it can be connected with the air conditioner to play its function and complete its use effect.
類型。通風管的種類很多。不同類型與空調配合使用，效果不同，尤其是隔熱通風管道。因此，如果我們要對通風管道進行加工，使其更好地與空調配合使用，那么在加工前也應考慮其類型，這是保證其運行并發揮有利作用的良好條件。
Type. There are many kinds of ventilation pipes. Different types have different effects when used with air conditioners, especially the heat insulation ventilation ducts. Therefore, if we want to process the ventilation duct to make it work better with the air conditioner, we should also consider its type before processing, which is a good condition to ensure its efficient operation and play a favorable role.
在加工通風管之前，應結合空調的基本情況，注意通風管的規格和類型。不同的空調需要不同的通風管道、不同的規格、不同的類型。因此，在處理通風管道時，應考慮上述情況。
Before processing the ventilation pipe, pay attention to the specification and type of the ventilation pipe in combination with the basic conditions of the air conditioner. Different air conditioners need different ventilation ducts, different specifications and different types. Therefore, the above situation should be considered when dealing with ventilation ducts.
Jinan ventilation pipe processing specification:
1、加工通風管時，為保證生產后的風管強度，切割時應預留20mm鋁箔作為保護邊；
1. In order to ensure the strength of the air duct after production, 20mm aluminum foil shall be reserved as the protective edge during cutting;
2、風管在粘接前應進行預組裝，并檢查接縫是否嚴密，尺寸是否符合要求。合適的粘合時間取決于季節溫度、濕度和粘合性能。粘合后，用正方形檢查。鋼帶。垂直度和對角線偏差的調整應符合規定。
2. The air duct shall be pre assembled before bonding, and check whether the joint is tight and whether the size meets the requirements. The appropriate bonding time depends on the seasonal temperature, humidity and bonding performance. After bonding, check with square. Steel strip. The verticality and diagonal deviation shall be adjusted in accordance with the regulations.
3、通風管道加工時，做好現場板材和預制管道成品的保護工作。
3. During the processing of ventilation pipes, protect the finished products of on-site plates and prefabricated pipes.
4、連接安裝后，應檢查粘接接頭，粘接后應平整、有歪斜。錯位。局部裂紋、2mm以上的縫隙等缺陷。
4. After the connection and installation, the bonding joint shall be checked, and the bonding joint shall be flat and skew. Dislocation. Local cracks, cracks above 2mm and other defects.
5、風管支架與吊架的距離應符合規定。
5. The distance between air duct support and hanger shall meet the requirements.
The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.yiruizhoucheng.com 。
上一篇：為您講解排煙罩特點以及現場制作事項
下一篇：排煙罩使其自身具有一定的使用壽命要養護
